Setting The Twa Average Time; Setting The Real-Time; Taking Maximum (Max) And Minimum (Min) Recorder Measurements - RS Pro RS-5322 Manuel D'instructions

PM2.5 AIR QUALITY MONITOR / EN

6-4 Setting the TWA Average Time

1. Press key to turn on the meter.
2. Press S key for 3 seconds to enter the setting mode, the "SET" mark
is displayed.
3. Press S key 4 times to enter the PM2.5 TWA average time setting
mode, the "SET PM2.5 TWA hour" mark is displayed.
4. Press key to select the desired average time from 1 to 24 hours.
5. Press ↵ key to store the setting value and to enter the VOCs TWA
average time setting mode, the "SET TWA VOCs hour" mark is displayed.
6. Press key to select the desired average time from 1 to 24 hours.
7. Press ↵ key to store the setting value and to enter the sampling time
setting mode, the "SET TWA St min sec" mark is displayed.
8. Press key to select the desired sampling time 1 minute, 5 minutes or
10 minutes.
9. Press ↵ key to store the setting value and exit this mode.

6-5 Setting the Real-Time

The meter internal clock is used in the display and for time-stamping
recorded measurements.
1. Press key to turn on the meter.
2. Press S key for 3 seconds to enter the real-time setting mode, the
DATE" mark is displayed.
"SET
3. Using key to position the cursor on the date or time element to adjust.
4. Press key to change the selected date or time element value.
5. Press ↵ key to complete the action.
6-6 Taking Maximum (MAX) and Minimum (MIN) Recorder
Measurements
1. Press key to turn on the meter.
2. Press MAX key to enter the read previous recorded data mode, the
"READ OLD DATA" mark is displayed.
14 05/24/18 Version No. 00