Chap. 8. Optional - Diamond FTI147 Manuel D'instructions

CHAP. 8. OPTIONAL
TOMATO MASHER OPTIONAL
The tomato masher is an optional accessory for the set machines 12 and 22. It is able to squeeze tomatoes, fruit (without
stone) and vegetable (cooked).
The food product load in the hopper happens manually; always manually and with the pestle help the food product is
introduced in the grinding neck towards the Archimedean screw.
The tomato masher application assembly on the machine is made in the following phases (in exemplification way it is
reported the machine with the basic body)
1. assemble the pipe union 2 and
tighten it with the proper
accessories block knob 1
2. Insert the Archimedean screw 3
inside the pipe union 2
3. Insert the filter 4
4. Block the filter with the wheel 5
5. Insert and position the drain 6
6. Arrange the salvage dump
containers for the puree and for
the reject
7. For the functioning refer to the
mincer instruction
MOZZARELLA CHEESE CUTTER OPTIONAL
The mozzarella cheese cutter is an optional accessory for the set machine 12 and 22. It is able to cut cheese, mozzarella,
mushrooms and carrots using the respective accessories:
cone n. 1 for mozzarella cone n. 2 for vegetables in general
holes mm 7
The food product load in the hopper happens manually; always manually and with the pestle help the food product is
introduced in the grinding neck towards the Archimedean screw.
The mozzarella cheese cutter application assembly on the machine is made in the following phases (in exemplification way
it is reported the machine with the basic body).
1. Assemble the apposite cones case
accessory 2 and tighten it with the
block accessories knob 1
2. Insert the proper hopper 5 supplied
with the mozzarella cheese cutter
3. Insert the desired cone 3 tighten it
with the die 4 through the key 6
supplied in equipment
4. Arrange the salvage dump
container
5. For the functioning refer to the
mincer instructions.
cone n. 3 to grate
holes mm 4 holes mm 2,5
cone n .4 to slice
cutting thickness mm 2
Pag. di
17 18