Chap. 1. Content Organization And Consultation Modality; Manual Purpose - Diamond FTI147 Manuel D'instructions

CHAP. 1. CONTENT ORGANIZATION AND CONSULTATION MODALITY

MANUAL PURPOSE

MANUAL IMPORTANCE
The present instruction manual for the use is to be considered as integral part of the machine:
1. Must be kept for all the machine life.
2. Must be coupled with the machine in case of its ceasing.
3. Besides to show all useful notices for the operators, contains (collected in specific chapters) the electric diagrams that
will be used for the possible maintenance interventions and reparation.
SCOPE / MANUAL PURPOSE
The instructions manual for the use has the purpose to furnish to the commitment all necessary information so that, except of
an adequate supplied machine use, is able to manage the same in the more autonomous way and possibly safe.
Besides the present manual has been written with the purpose to supply indications and warnings to know the supplied
machine, to understand its principles and functioning limits. For possible doubts you can call the Authorized Assistance
Center.
DESTINATARI
The present instruction manual for the use, delivered in number of 1 copy together with the machine, is supplied as integral
part of the machine, is turned both to the operators both to the skilled technicians qualified to the installation, use and
maintenance.
The prevention and protection service responsible of the commitment and the additional employees, to whom is assigned
the machine, must take vision of the present instructions manual for the use, with the aim to adopt all technical and
organizational measures
RESPONSIBILITY
If the present manual endures damages or is lost, it is possible to request a copy to the Authorized Assistance
Center.
The present manual reflects the technical state during the machine manufacturing; the manufacturer reserves the
right to update the production and of consequence other manual issues, without the obligation to update
productions or previous manuals, if not in particular cases regarding the health and the people safety.
Pay particularly attention to the residual risks content present on the machine and the prescriptions to which the
operators must keep.
The manufacturer is the responsible for the machine in its original configuration.
The manufacturer isn't the responsible for damages caused from the improper use or not correct of the machine
and documentation or for damages caused from the imperative standards violation, negligence, lack of
experience, imprudence and the not respect of regulation standards on behalf of the employer, of the operator or
the maintenance man and for every possible damage, caused from an irrational, improper and/or wrong use.
The manufacturer isn't the responsible for the consequences caused from the not original spare parts use or of
equal characteristics.
The manufacturer is the responsible only for the information showed in the manual original version in Italian
language.
The prescriptions non-fulfillment contained in this manual will cause the guarantee immediate decay.
The factory responsibles, that supervision to the working activities, in the field of the foreseen respective attributions
and competence, must:
Carry out the foreseen safety measures;
Make informed the operators about the specific risks whom are exposed and bring to their knowledge the
prevention essential standards;
Prepare and require that the single operators observe the safety standards and use the protection means put at
their disposal:
Work an operator, contemporary, on this product.
Pag. di
3 18