Mode; Sensitivity - Telestar Imperial DABMAN i610 Mode D'emploi

7. SETTINGS
Which radio stations are to be found during an FM search can be
set in the Sensitivity option.
Use the ▼▲ buttons on the remote control in the Settings menu
to select the FM Setting and press the ENTER button on the
E
remote control or confirm with the ENTER button on the unit.

7.1.14.1. Mode

Select this menu item to switch FM reception from stereo (fac-
tory setting) to mono.
Confirm your entry with ENTER on the remote control or by
pressing the ENTER button on the unit.

7.1.14.2. Sensitivity

Search sensitivity:
Select here which FM stations are to be found during a scan:
The radio shall only receive stations with a strong signal.
The radio shall only receive stations with a standard signal.
Also receive stations with a weak
signal.
Confirm your entry with ENTER on the remote control or by
pressing the ENTER button
on the unit.
Stereo sensitivity:
Here you can select the setting to automatically switch the radio
to mono mode if the reception quality is not sufficient to achieve
optimum stereo.
Operating Manual 158