Dhcp - Telestar Imperial DABMAN i610 Mode D'emploi

7. SETTINGS
This function should only be performed by users with experience
in this area.
Here you can deactivate the DHCP function to assign a manual IP
address to your radio.
E
Use the ▼▲ buttons on the remote control to select the manual
configuration and press the ENTER button on the
remote or the ENTER button on the device.
In the next item, select the network connection cable network or
wireless network that you want to edit manually.
Press the ENTER button on the remote or confirm with the
ENTER button on the device.

7.1.3.4.1. DHCP

DHCP enables connected clients to be integrated into an existing
network without manually configuring the network interface. Re-
quired information such as IP address, netmask, gateway, name
server (DNS) are assigned automatically.
The DHCP function is activated at the factory.
If the DHCP function is deactivated, the information required for
a network connection must be set manually.
You can deactivate the DHCP function in this menu item.
Use the ▼▲ buttons on the remote control to select the manual
configuration and press the ENTER button on the remote or
confirm with the ENTER button on the device.
Activate or deactivate the DHCP function in the next step.
Press the ENTER button on the remote control or confirm
by pressing the ENTER button on the device.
145 DABMAN i610