Location Of Parts; First Use - EWT OSCILLOR Manuel D'utilisation

1. Front guard
2. Blade cap
3. Fan blade
4. Rear guard securing
nut
5. Rear guard
6. Motor shaft
7. Motor
8. Oscillation knob
1. Please read these instructions carefully before use and keep them for future
reference.
2. Check your local main voltage whether it is the same as stated on the appliance.
3. Before using for the first time, remove any protective films or stickers from the
appliance.
4. Ensure the power switch is at "OFF" position.
OSCILLOR

LOCATION OF PARTS

FIRST USE

9. Speed control switch
10. Supply cord
11. Metal stand # 1
12. Fixing screw # 1
13. Metal stand # 2
14. Fixing screw #2
15. Clips
20 | P a g e