Maintenance; Side Brushes; Side Wheels And Castor - Amibot Spirit LASER H2O Manuel D'utilisation

Maintenance

Side brushes

engraved letters on the side brushes and the robot are there to guide you.
NOTE: Side brushes must be replaced if you notice that their original shape has
changed.

Side wheels and castor

Wipe the side wheels with a dry cloth to remove built up dust.
Pull firmly on the castor block to remove it. Then remove all the debris
from inside the cavity using a soft cloth. Use a slotted screwdriver to
remove the castor from its frame and wipe it clean. Remove the hair
and other debris caught around the axle.
Unclip the side brushes by gently pulling them
upwards and run them under clean water. Wait
until they are completely dry before reusing
them. The left brush is marked with an "L"
and the right brush is marked with an "R". The
23
EN