Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Maintenance
Water tanks
Remove the water tanks and rinse them with clean water. Wait until
they are completely dry before you reattach them to the robot.
Regularly check that the water tanks' drip nozzles are not obstructed
by debris or limescale. Clean them with a soft cloth.
Gap sensors
Empty the water tanks every
time the robot completes a
cleaning cycle. Turn the robot
over and remove them by gently
pulling upwards.
Turn the AMIBOT over and wipe
any debris from the fan with a
dry cloth so the same level of
suction is maintained.
14
Publicité
Chapitres
Table des Matières
Dépannage
