Product Maintenance; Cleaning Side Brushes; Cleaning Dust Bin And Filters - Amibot Prime Mode D'emploi

Product Maintenance

1. Cleaning Side Brushes

Clean the side brush when it gets dirty and replace it if it's damaged. Max life span for side brush is
12 months.
Note: Before replacing side brushes, check and make sure the L / R mark on side brush match with
the L / R mark on the bottom base of the robot.

2. Cleaning Dust Bin and Filters

Empty and clean the dust bin after each use following the steps as shown in the figures below:
Notes:
a. Wash HEPA filter after 15~30 days of use. Max life span for HEPA and filter is 24 months.
b. Reinstall the HEPA and primary filter after they are fully dry.
c. HEPA and primary filter could be replaced if needed.
d. Do not dry the filters under baking sunshine.
13