EN
Maintenance
Side brushes
NOTE: Side brushes must be replaced if their original shape has changed.
Side wheels and castor
Unclip the side brushes by gently
pulling them upwards and run
them under clean water. Dry
side brushes well before reusing
them. The left brush is marked
with an "L" and the right brush is
marked with an "R". The colour
codes and the engraved letters
on the side brushes and the
robot are there to guide you.
Wipe the side wheels with a dry
cloth to remove accumulated
dust.
Pull firmly on the castor to
remove it. Then remove all the
debris from inside the cavity
using a soft cloth. Use a slotted
screwdriver to remove the castor
from its frame and wipe it clean.
Remove the hair and other debris
caught around the axle.
26