Maintenance; Side Brushes; Side Wheels And Castor - Amibot PURE LASER Manuel D'utilisation

Maintenance

Side brushes

an "L" and the right brush is marked with an "R". The engraved
letters on the side brushes and the robot are there to guide you.
NOTE: Side brushes must be replaced if you notice that their original shape has
changed.

Side wheels and castor

Wipe the side wheels with a dry cloth to remove built up dust.
Pull firmly on the castor block to remove it. Then remove all the debris
from inside the cavity using a soft cloth. Use a slotted screwdriver to
remove the castor from its frame and wipe it clean. Remove the hair
and other debris caught around the axle.
Unclip the side
pulling them upwards and rinse them
under clean water. Wait until they are
completely dry
Check that the left brush is marked with
21
brushes by
before reusing
EN
gently
them.