Product Maintenance; Cleaning Side Brushes; Cleaning Dust Bin And Filters - Amibot Flex Mode D'emploi

Product Maintenance

Cleaning Side Brushes

Check the side brush when it gets dirty and replace it if it's damaged. Max life span for side brush is 12
months.
Note: Before replacing side brushes, check and make 'L'/ 'R' mark on side brush match with the 'L'/ 'R'
mark on the bottom base of the robot.

Cleaning Dust Bin and Filters

Empty and clean dust bin after each use following the steps as shown in the figures below:
Note:
a. Wash HEPA filter after 15~30 days of use. Max life span for HEPA and filter is 24 months.
b. Reinstall the HEPA and primary filter after they're fully dry.
c. HEPA and primary filter could be replaced if needed.
d. Do not dry the filters under baking sunshine.
16