6.2 Log Placement - Napoleon Havelock GDS50-1NSB Manuel D'installation Et D'opération

fi nishing
EN
6.2 log placement
WARNING
!
• Failure to position the logs in accordance with these diagrams or failure to use only logs specifi cally approved
with this appliance may result in property damage or personal injury.
• Logs must be placed in their exact location in the appliance. Do not modify the proper log positions, since
appliance may not function properly and delayed ignition may occur.
• The logs are fragile and should be handled with care.
LOG SUPPORTS
1. Place the 2 piece charcoal ember strip along the
edge of the fi rebox.
#2
3. Align the square peg on log #2 with the notch on the
base log.
#4
5. Finally, align the square peg on log #4 with the notch
on the left end of the base log.
30
W415-2348 / B / 01.22.20
#1
2. Place the base log #1between the log supports,
ensuring that it is pushed back against the back of
the supports.
4. Align the square pegs on log #3 with the notches on
the right end of the base log.
#3