13- Terminology - Detnov CCD-108 Manuel D'installation Et Mode D'emploi

13- Terminology

Fire alarm: Audio and visual signal to indicate a possible fire.
-
- False alarm: Fire alarm provoked by causes other than fire.
Fault: Fault that may inhibit detection.
-
- Fault warning: Audio and visual signal to indicate a fault.
- EMC: Electromagnetic compatibility.
- Silence buzzer: Button that allows you to silence the panel's internal buzzer.
- System fault: Critical fault that disables the system.
Regulations: Regulation concerning fire detection units.
-
- Pilot: Warning light(led).
Alarm button: Device that allows the fire alarm to be activated manually.
-
- Emergency plan: Established procedures, which should be complied with when a fire
alarm situation occurs.
- Start-up: Procedure with which the installer ensures that the system satisfies the
established requirements.
Reset: Button that restarts the unit.
-
- End of line resistor: Resistor with a value of 4K7 that establishes the end of each line
of detectors and enables detection of faults in the installation.
- Zone: Physical sub-division of the spaces protected by the detection system.
Generally each line of detectors is associated with an zone.
33
GB