6- User Guide; Led Indications - Detnov CCD-108 Manuel D'installation Et Mode D'emploi

6- User Guide

To operate the conventional panel properly, please find below details on the functions
of all the indication and control elements of the unit. The operating modes and what to
do in case of an alarm or fault are also explained.
6.1.1- Zone Alarm Led (1)
This red indicator is associated with a zone, which lights up when the unit detects an
alarm in this zone:
Blinking: The alarm is caused by one or more detectors. In this case there is no
•
alarm caused by the activation of a manual call point.
Fixed: The alarm is caused by a manual call point. The MCP takes priority over the
•
detectors.
6.1.2- Fault/Disablement/Test Zones LED (2)
Yellow indicator associated with a zone:
Blinking: The associated zone has a fault or is undergoing testing.
•
• Fixed: The associated area is disconnected.

6.1- LED Indications

17
GB