8- Expansion Module; Expansion Module With Output Voltage; Expansion Module With Contact Free Voltage Relay Output - Detnov CCD-108 Manuel D'installation Et Mode D'emploi

8- Expansion module

There are 2 expansion cards that allow you to increase the panel's performance.

8.1 - Expansion module with output voltage

The panel has the possibility of connecting up to 3 expansion modules with relays with
output voltage for connecting more sounders to the system. This expansion module is
managed using the activate and silence sounders keys. Each of the relays corresponds
to its corresponding zone number, i.e., relay 1 to zone 1, relay 2 to zone 2, continuing
GB
consecutively. To fit this expansion module, you need to remove the main PCB board
and insert the module in the lower part, using screws. For further information consult
the expansion module manual.
8.2 - Expansion module with contact free voltage relay
output
The panel has the possibility of connecting up to 3 expansion modules with 4 voltage-
free relays. Each relay of these cards is assigned to a zone, i.e., relay 1 to zone 1, relay
2 to zone 2, continuing consecutively. To fit this expansion module, you need to remove
the main PCB board and insert the module in the lower part, using screws. For further
information consult the expansion module manual.
27