Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
Safety Instructions for Steam Wallpaper Strippers
Attention!
When working with hot steam (min.100°C), there is a risk of serious
scalding. Hot steam and boiling water can emit when the safety valve (5 A)
is activated due to overpressure in incorrect operation of the unit.
Only change position during use, with care. The steam unit, hose and
steamplate can be very hot. Always wear suitable protective clothing /
gloves.
Operate the unit only with pure water without agents or additives. Do not
switch the unit on when empty.
Never point the steamplate / bar at people, animals or at objects sensitive to temperature.
Always ensure that the unit is standing securely in a horizontal position (on the floor)
(Fig� 6)�
Do not stand on or place objects onto the unit or steam hose. Never over-twist or make
kinks in the steam hose, and never block the valve. Only carry the unit by its handle. Never
pull on the steam hose or supply cord.
Never submerge the unit in liquid. Every time the accessory is changed for filling / refilling
and emptying or when the steam unit is not in use (including work pauses), pull the mains
plug out of the socket-outlet. Never overfill the unit. Unplug the mains plug in the event of
overfilling or a fault. Use only WAGNER original spare parts and accessories!
Caution! Danger of short-circuits! Cover socket-outlets and switches and do not subject
them to steam. When using an extension cable: max.10m long – the cord cross-section
must be at least 3 x 1 mm
bases and coated materials these can be impaired by heat or steam. Remedy: Use a heat
/ steam shield made of cardboard or metal. The unit switches off automatically in case of
overheating. After approx.10 minutes, the unit switches itself back on automatically.
The steam time is approximately 70-80 minutes. Never leave a unit unattended if switch is
on. Keep the unit away from children and animals. Never let the container steam until it is
completely empty.

Intended use

The Steam Wallpaper Stripper is solely suited to removing wallpaper.
To ensure long life of the steam wallpaper stripper, clean your unit immediately and
thoroughly after each use.
CAUTION! - Steam can loosen weak, cracked, porous or poorly bonded plaster. Check
a small area before starting work. Do not hold the steamplate in one position too long
and stop if plaster starts to break.
PROTECT YOUR HOME- To prevent marks from steam on carpets and soft furnishings it
12
. Avoid damage! When working in the vicinity of wood / gypsum
2
W14/W15/W16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

W15W16

Table des Matières