TYROLIT Hydrostress FSD1274 Serie Mode D'emploi page 45

TYROLIT Hydrostress AG
7.8 Lowering / raising saw blade
7.8.1 Lowering example
1. Press the Lower button (1) until the saw blade touches the material to be cut.
2. Set the cutting depth indicator (2) in the 0 position.
3. Using the Lower key, lower the saw blade to the desired cutting depth.
4. Button depth stop (3) min. press forward for 3 seconds. Light (4) comes on.
5. The lowering speed can be controlled using the control valve (5).
In order to deactivate the stored cutting depths, gently raised the saw blade and move back flip
switch (3).
Page 18 Floor Saw FSD1274 / FSD1274 3-speed gearbox