TYROLIT Hydrostress FSD1274 Serie Mode D'emploi page 46

7.9 Adjusting the feed
1. Place coupling lever (1) in the coupled position.
2. Using the feed adjuster (2). Set the direction of travel and speed.
Floor Saw FSD1274 / FSD1274
Symbol Significance
Coupling lever in coupled position
Coupling lever in uncoupled position
Feed adjuster in the forwards direction of travel
Feed adjuster in the backwards direction of travel
Feed adjuster is in the neutral position
Brake is released
Important: Only engage coupling at low engine speed (blade speed)
3-speed gearbox
TYROLIT Hydrostress AG
Page 19