TYROLIT Hydrostress FSD1274 Serie Mode D'emploi page 44

7.7 Switch on motor
1. Turn ignition key (3) to the preheat position in order to preheat the motor.
2. Turn ignition key further to the right in order to start.
3. With engine speed controller (4) set optimum blade speed.
Floor Saw FSD1274 / FSD1274
Symbol Significance
Coupling lever in coupled position
Coupling lever in uncoupled position
Operating handle (2) engaged in 0 position
Coupling lever (1) is in the uncoupled position
EMERGENCY STOP switch (5) has been released
Battery and oil pressure displays light during starting and then go out.
3-speed gearbox
TYROLIT Hydrostress AG
Page 17