Brief Description Of The Press Tool - NovoPress AFP 101 Manuel D'utilisation

AFP 101
EN EN

5. Brief description of the press tool

5.1 Automatic press cycle
The press tool features positive control. During compression, the press tool remains in the position
reached, even if the button is temporarily released. When the intended switch-off force is reached, this
is perceptible by means of an increase in the motor speed and a perceptible decrease in pressure.
After releasing the button, the tool returns to its initial position. For safety reasons, the positive control
is only activated after a minimum force has been achieved. Until this force is achieved, the pressing
process can be interrupted at any time by releasing the button. The tool then automatically returns to
its initial position.
12
1. Start button
2. Press jaws
3. Retaining pin
4. Rechargeable battery