Remote Blower Preparation - Zephyr Trapeze CTP-E48BSX Guide D'utilisation, D'entretien Et D'installation

INTERNAL BLOWER PREPARATION CONT.
screws.
9. Secure capacitor box to internal hood body by
3/16*3/8 screws.

REMOTE BLOWER PREPARATION

8. Connect 6 pin molex connector from capacitor
cable to 6 pin molex connector from control box.
Connect 2 pin plug from AC power cable to 2 pin
plug from control box. Secure cables to hood
interior with zip ties and zip tie holders.
2. Secure AC power box and remove blower
screws each.
10
www.zephyronline.com