Zephyr Trapeze CTP-E48BSX Guide D'utilisation, D'entretien Et D'installation page 16

Telescopic Rod Installation
M4*4 set screw for each rod.
set screw for each rod set.
FRONT
Utensil Rail Installation
1. Attach utensil rail to long side of hood canopy. A small hole has been pre-drilled into the canopy to provide a starting
onto the canopy. Use caution and be careful not to scratch the stainless steel of the canopy when performing this
step.
canopy.
Set
screw
14
www.zephyronline.com
Set
screws
Tool
BACK