Britax ® Infant Car Seat Installation - BOB Duallie Mode D'emploi

3. Verify Infant Car Seat Latched
Properly
Push Infant Car Seat straight down
onto ICSA. Look and listen for each
Side Hook (on sides of Infant Car
Seat) to lock into each respective
Hook Socket on ICSA.
CLICK
4. Verify Infant Car Seat is Securely
Attached
Pull up on Infant Car Seat Carry
Handle to verify Infant Car Seat is
securely attached.
5. Secure Restraint Belt
Proceed to section titled "Secure
Restraint Belt" (pg.16).
Failure to properly secure Restraint
Belt may result in accident, injury
or death.
CLICK
!
BRITAX INFANT CAR
®
SEAT INSTALLATION
Failure to properly install Infant Car
Seat on Infant Car Seat Adapter
may result in accident, injury or
death.
1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar, place Restraint Belt
ends to the sides of stroller seat (see
stroller owner's manual if necessary).
2. Align Infant Car Seat
Place Infant Car Seat"rear facing",
directly centered on top of ICSA, align
ICS Adapters on Infant Car Seat with
the Click & Go Receivers on ICSA.
3. Verify Infant Car Seat Latched
Properly
Push Infant Car Seat straight down
onto ICSA until the adapters on each
side lock into the receivers on ICSA.
CLICK
!
CLICK
15
OMB11B