Speck pumpen BADU EasyFit Eco VS Mode D'emploi page 28

POWER
Speed adjustable
1 2
INFO
POWER
Speed adjustable
2
1
INFO
POWER
Speed adjustable
1 2
INFO
28 EN VG 766.2130.052
Setting the parameters
You change to the setup menu by pressing the
"Setup" button for 3 seconds. There the "Info"
button can be used to scroll through the menu.
The first position of the display shows the
current menu item and the remaining four
3
S
positions the parameter to be set.
0
If the "S" button is pressed within the menu, all
the changed values are stored and the setup
menu exited. The text "StorE" is shown in the
display.
If you press the "0" button, the setup menu is
exited without the changed values being
stored.
Priming parameters
The speed is set under the menu item "n"
while the time during the priming phase is set
under the item "t".
"t oFF" = no priming phase
3
S
from oFF, 1 - 10 minutes can be set
0
Digital inputs
External controlling can be activated or
deactivated with the menu item "E".
"oFF" = deactivated
"dI" = digital inputs (potential-free) activated
3
S
0
10/2014