Cleaning And Maintenance - HQ Power VDPLDJBAR8 Mode D'emploi

2 dimmer
strobe/chase
3
speed
4 R brightness
5 G brightness
6 B brightness
7 R brightness
8 G brightness
9 B brightness
10 R brightness
11 G brightness
12 B brightness
13 R brightness
14 G brightness
15 B brightness
8.7 Ob-3 Mode
To select the ob-3 mode:
1. Press MENU until <Ob-3> is displayed.
2. Press ENTER to confirm.
The ob-3 mode allows you to use the VDPLDJBAR8 as a basic 3-channel RGB device. Individual control
of the parCANs and the built-in programmes are not available.
9.

Cleaning and Maintenance

Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
Cleaning

Clean the external optics with a soft cloth.

Always be sure to dry all parts completely before plugging the unit back in.

Cleaning frequency depends on the environment in which the unit operates (i.e. smoke, fog residue,
dust, dew).

Do not immerse the device in any liquid.

Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surface/vents.

Clean all external optics and glass/transparent surfaces with a mild soap solution, ammonia-free
glass cleaner, or isopropyl alcohol.

Apply the solution directly to a soft, lint-free cloth or a lens cleaning tissue.

Softly drag any dirt or grime to the outside of the external optics or glass/transparent surface.

Gently polish until free of haze and lint.

Dry carefully after cleaning.
Maintenance

All screws should be tightened and free of corrosion.

The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...

Mechanically moving parts must not show any signs of wear and tear.

The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.

There are no user-serviceable parts, apart from the fuse.

Refer to an authorized dealer for service and/or spare parts.
V. 01 – 25/11/2014
VDPLDJBAR8
000 255 RGB brightness from 0-100 %
000 015 no strobe
016 255 strobe speed
000 255 1 st red LED from 0-100 %
st
000 255 1 green LED from 0-100 %
st
000 255 1 blue LED from 0-100 %
000 255 2 nd red LED from 0-100 %
000 255 2 nd green LED from 0-100 %
000 255 2 nd blue LED from 0-100 %
000 255 3 rd red LED from 0-100 %
000 255 3 rd green LED from 0-100 %
000 255 3 rd blue LED from 0-100 %
000 255 4 th red LED from 0-100 %
000 255 4 th green LED from 0-100 %
th
000 255 4 blue LED from 0-100 %
9 ©Velleman nv