Cleaning And Maintenance; Technical Specifications - HQ Power ASTAR III TRIPLE DERBY Notice D'emploi

e. Setting the DMX start address
1. Press Menu until
2. Press Up or Down to set the DMX start address (001 to 505) and confirm with Enter.

8. Cleaning and maintenance

•
All screws should be tightened and free of corrosion.
•
The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections.
•
Moving mechanic parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain the
device.
•
Disconnect the device from the mains prior to maintenance activities.
•
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
•
There are no user-serviceable parts.
•
Contact your dealer for spare parts if necessary.

9. Technical Specifications

power supply
power consumption
DMX connection
number of LEDs
dimensions
weight
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 02 – 03/01/2013
VDPL300HD
appears and confirm with Enter.
230Vac/50Hz
26W
3-pin XLR in- and output
3 x 5W
340 x 245 x 210mm
3.25kg
6 ©Velleman nv