Safety Devices And Protection Equipment - WALTERSCHEID SW40 Notice D'utilisation

PRODUCT DESCRIPTION
2.2

Safety devices and protection equipment

This chapter shows the arrangement of the correctly mounted safety devices and protection equip-
ment in the safety position.
WARNING
Fig. 2
(1) Hollow dowel pin; for securing the respective clamping lever against ejection from the counter
bearing in the case of a malfunction
(2) Protective tube on the respective hydraulic hose line to the hydraulic pump
10
Hazards for persons can arise from ejected objects or highly
pressurised hydraulic oil discharging if the required safety de-
vices and protection equipment are not present during opera-
tion!
Only put the special tool into operation when safety devices and
•
protection equipment are completely installed.
Replace defective safety devices and protection equipment im-
•
mediately with new ones.