Basic Safety Instructions; General Safety And Accident Prevention Instructions - WALTERSCHEID SW40 Notice D'utilisation

SAFETY INSTRUCTIONS
3.4

Basic Safety Instructions

3.4.1

General safety and accident prevention instructions

Use of the special tool
20
Basic Safety Instructions:
always apply for the safe operation of the special tool,
•
are compiled in the following subchapters.
•
In addition to the safety instructions in this chapter, also observe
•
the generally applicable safety and accident prevention regula-
tions.
Always wear your personal protective equipment when working
•
on the special tool.
Observe the warning notices and instructions applied to the spe-
•
cial tool. In this way, you obtain important information for the
safe and faultless operation of the special tool.
In addition to the basic safety instructions in this chapter, also
•
observe the action-related safety instructions of the other chap-
ters.
Send any people out of the close vicinity of the special tool be-
•
fore you put it into operation. Pay particular attention to children.
Before starting work, familiarise yourself with all the equipment
•
and control elements and their functions of the special tool. Dur-
ing the work is too late for this.
Only put the special tool into operation when all safety devices
•
and protection equipment are installed.
It is forbidden for persons to be in the work / danger zone of the
•
special tool.
There are crushing and shearing points on moving parts of the
•
special tool which are operated by external force (e.g. hydrau-
lically).
You are only permitted to actuate parts of the special tool oper-
•
ated by external force if there are no persons in the danger zone
of the special tool.