SOMFY 1875108 Manuel D'utilisation page 65

Positions of
Zone
the switches
AD
(default)
A
AX
1
AX
2
(1) Activate this function in the LCD keypad menu (see menu 7641 in the installation manual or "Scenario settings" on
your computer).
(2) Set this delay in the LCD keypad menu (see menu 775 in the installation manual or "Advanced settings" on your
computer).
From a computer:
Close the battery
reassemble the unit the right way round:
The base must be held with the fixing screws at
■ ■
the bottom
The cover must be fitted with the arrow pointing
■ ■
upwards
Copyright © 2015 Somfy SAS. All rights reserved.
If zone A is armed:
■ Chime!
(if KIELA™
function on)
If zones A, B and C are armed:
■ Immediate triggering of the sirens, flash, dial-up, roller shutter
lowering and light control activation
(1)
If zone A is armed:
■ Chime!
If zone A is armed:
■ Chime!
compartment ensuring
What happens in the event of intrusion
(in partly or fully armed mode)
If zones A, B and C are armed:
■ Delayed triggering of the sirens, flash, dial-up
and roller shutter lowering
and light control activation
■ Recording in the log (menu 6 "Event log")
If zones A, B and C are armed:
■ BEEP!
on the sirens
■ Triggering of the flash on the outdoor siren
If zones A, B and C are armed:
■ BEEP!
on the sirens
■ Triggering of the flash on the outdoor siren
■ Light control activation (if a receiver is present)
■ Delayed lowering of the roller shutters
AD
A
AX1
AX2
Switch
you
after the entry delay
(1)
(2)
65