Maintenance
Replacing the batteries
1
Disable the installation's tamper switch to avoid triggering the alarm:
Enter the user code on the keypad and then press the OFF key until the
■ ■
indicator goes out.
Or press the OFF key on the remote control until the indicator goes out.
■ ■
You have 2 minutes to open the relevant part.
2
Remove the fixing screw
(c) and take off the cover. Do
not touch the lenses.
5
Remove the battery
compartment cover.
Maintenance
Clean the lenses with a dry cloth.
70
3
Remove the 2 fixing
screws (b) from the base. Do
not touch the mirrors.
6
Replace the spent batteries with 3 new LR03 alkaline
batteries, all the same make and from the same batch, making
sure they are the right way round (+/-).
Dispose of the spent batteries at a collection
point.
Close the detector, reversing the above opening
steps.
Copyright © 2015 Somfy SAS. All rights reserved.
Keypad:
Clavier :
CODE +
4
Remove the rear mount,
sliding it downwards and
away from the base.
2
1