Skil 2354 Consignes De Fonctionnement/Sécurité page 12

SM 1619X05087 05-12_SM 1619X05087 12-09 5/24/12
voluntarily participating in an industry program
to collect and recycle these batteries at the end
of their useful life, when taken out of service in
the United States or Canada. The RBRC
program provides a convenient alterative to
placing used Li-ion batteries into the trash or
the munici pal waste stream, which may be
illegal in your area.
Please call 1-800-8-B TTERY for information
on Li-ion battery recycling and disposal
bans/restrictions in your area, or return your
batteries to a Skil/Bosch/Dremel Service Center
for recycling. Robert Bosch Tool Corporation's
involvement in this program is part of our
commitment to preserving our environment
and conserving our natural resources."
Battery Removal Instructions
Run motor until battery is completely
discharged before attempting to remove
battery from your tool.
1. Remove the four (4) housing screws with a
flat blade screwdriver.
2. Remove housing cover by lifting upward
from front end of tool.
3. Disconnect lead wires from switch.
4. Wrap heavy insulating tape around battery
terminals or enclose in a sealable plastic bag
to prevent possible shorting.
5. Dispose of battery through your local waste
removal authority or a Skil Service Center.
12