The Info Menu Item; Info; Measured Values Lt Status Grid Status; Device Information - Fronius Galvo 1.5-1 208-240 Instructions De Service

The INFO menu item

INFO

Measured values
Measured val-
LT status
ues
Grid status
LT status
Grid status
Device Informa-
The device is used to display settings relevant to a power supply company. The
tion
displayed values depend on the respective country setup or device-specific in-
verter settings.
INFO
(information on the device and software)
Display range:
PV Ins.
Insulation resistance of the PV system
(for ungrounded solar modules and for solar modules groun-
ded at the negative pole)
Fan #1
Percentage value of the fan's target power
U PV1
Current DC voltage at the terminal, also if the inverter is not
feeding in at all (from the first MPP Tracker)
The status display of the last error that occurred in the in-
verter can be shown.
IMPORTANT! Status codes 306 (Power low) and 307 (DC
low) appear naturally every morning and evening due to low
solar irradiance. These status codes are not the result of a
fault.
- After pressing the "Enter" key, the power stage set status
and the last error that occurred are displayed
- Use the "Up" and "Down" keys to scroll through the list
- Press the "Back" key to exit the status and error list
The last 5 grid errors that occurred can be displayed:
- After pressing the "Enter" key, the last 5 grid errors that
occurred are displayed
- Use the "Up" and "Down" keys to scroll through the list
- Press the "Back" key to exit the grid error display
PV Ins. / Fan #1 / U PV1
33