Application Example: Setting The Feed-In Tariff - Fronius Galvo 1.5-1 208-240 Instructions De Service

The currently selected entry is dis-
played.
Application Ex-
ample: Setting
the Feed-In Tar-
iff
The currently selected entry is dis-
played.
Select the 'Energy yield' setup menu
1
entry
2 Press the 'Enter' key
The overview of adjustable values is dis-
played.
Use the 'up' or 'down' keys
3
the 'Feed-in tariff'
4 Press the 'Enter' key
The feed-in tariff is displayed
The tens digits flashes.
Use the 'plus' or 'minus' keys
5
lect a value for the tens digit
Press the 'Enter' key
6
The units position flashes.
Repeat steps 5 and 6 for the units posi-
7
tion and the 3 decimal places until ...
The set feed-in tariff flashes.
Press the 'Enter' key
8
The feed-in tariff is applied and the over-
view of adjustable values is displayed.
Press the 'Esc'
9
The 'Energy yield' setup menu entry is dis-
played.
to select
to se-
23