Main Menu Functions; Menu Contents - Pulsar HELION 2 XP Mode D'emploi

Mode М (manual). Close the lens cover, turn the device on with a
short press of the ON button (11). Having finished calibration, open
the lens cover.
Mode SA (semi-automatic). Calibration is activated with a short
press of the ON button. You do not have to close the lens cover (the
sensor is closed with the internal shutter automatically).
Mode А (automatic). The device calibrates by itself according to the
software algorithm. You do not have to close the lens cover (the
sensor is closed with the internal shutter automatically). User
assisted calibration with the ON button is allowed in this mode (in
semi-automatic mode).
10
STEP-UP DIGITAL ZOOM
The device allows you to quickly increase the basic magnification
(please refer to the "Digital zoom"
times or four times or eight times, as well as to return to the basic
magnification. To operate the step-up digital zoom, press successively
the DOWN (8) button.
11
QUICK MENU FUNCTIONS
The Quick menu allows change of basic settings (display brightness and
contrast, continuous digital zoom and stadiametric rangefinder).
Enter the menu with a short press of the М (9) button.
To toggle between the functions below, press successively the M
button.
Brightness – press the UP (10)/ DOWN (8) buttons to change
display brightness from 0 to 20.
Contrast – press the UP/ DOWN buttons to change display
contrast from 0 to 20.
Digital zoom – press the UP/ DOWN buttons to change zoom
from 2.5x to 20x. Continuous digital zoom is in 0.1x increments.
The initial value of the continuous digital
digital zoom is not active.
The stadiametric rangefinder
change the distance between the special mark points to determine
the distance to the observed object.
9
line in the specifications table) by two
zoom is x1.0 if the step-up
– press the UP/DOWN buttons to
Basic mode – it allows you to select one of the three modes
as the basic one for the user mode.
Notes. Display brightness and contrast settings are saved in the
memory when the unit is turned off.
Exit the quick menu with a long press of the M button or wait 10
seconds to exit automatically.
12

MAIN MENU FUNCTIONS

Enter the main menu with a long press of the М (9) button.
Press the UP (10)/ DOWN (8) buttons to switch between the menu
options.
Menu navigation is cyclical: as soon as the last menu option of the
first tab is reached, first menu option of the second tab starts.
Enter a menu option with a short press of the М button.
Exit the menu with a long press of the М button.
Automatic exit takes place in 10 sec of inactivity.
Upon exit from the menu the cursor location
the duration of the working session (i.e. until the unit is turned off).
Upon restarting the device and entering the menu the cursor will be
located on the first menu option.

MENU CONTENTS:

TAB 1
Menu Wi-Fi activation
10
Black Hot
is memorized only for
TAB 2
Menu General settings
10