Preparation
Note: After switching the unit back on again, carry out an empty withdrawal (without coffee
grounds) as described below in order to bring the system to temperature.
Fill water in the tank. 2.5
●
litres at the maximum.
Switch the unit on.
●
Put a cup below the outlet.
●
Then press the control lever downward.
●
Insert the desired filter
●
insert.
The unit is heating up.
●
Press the operating lever
●
upward.
Put in the group handle wi-
●
thout coffee grounds (from
left to right).
The unit is ready for opera-
●
tion.
Allow the cup to be filled
●
half in order to bring the
system to temperature.
55
EN