MANUAL
If the button illuminates
●
and
not flash any more, the
unit is heated up and
ready.
Let the air escape until a
●
constant water jet runs
through.
PREPARATION
Note: After switching the unit back on again, carry out an empty withdrawal as
described below in order to bring the system to temperature.
Remove the water tank.
●
36
Put one cup or glass
●
under the steam distri-
red and do
butor.
Fill the water tank with
●
water and re-insert it.
Turn the control knob
●
to
, the process will
start.
Insert the desired filter
●
insert.