Maxi-Cosi 2wayFix Mode D'emploi page 9

EN
2wayFix base
A
Anchor points for securing seat
B
Storage compartment for manual
C
ISOFIX connectors
D
ISOFIX connectors release button
E
Battery compartment
F
Release button for support leg
G
Support leg
H
Seat release button
I
Indicator panel
J
ISOFIX connectors indicator
K
Support leg indicator
L
Indicator car seat locked in position
M
Battery voltage indicator
N
Installation test button
O
Older then 15 Months indicator
P
Warning switch off front passenger airbag
Q
Safety
2wayFix general instructions
1. The 2wayFix is for car use only.
2. The 2wayFix may only be used together with the Pebble
Plus and the 2wayPearl.
3. You are personally responsible for the safety of your
child at all times.
4. Never leave your child unattended.
5. Do not use second-hand products if you do not know
their history.
16
6. Replace the 2wayFix after an accident.
7. Please read this instruction manual carefully and keep
it for future reference.
8. Use only original parts approved by the manufacturer.
WARNING :
Do not make any changes to the 2wayFix,
as this could result in dangerous situations.
2wayFix car use
1. The 2wayFix is an ISOFIX system.
2. It is only suitable for use in cars equipped with ISOFIX
anchor points. For more information, check your car
owner's manual.
3. Check to make sure your car is listed on the approved
'car fitting list' on www.maxi-cosi.com.
4. Before buying the 2wayFix, check to make sure it fits
properly in your car.
5. Check whether the fold-down rear seats are locked
into position.
6. Unfold the 2wayFix support leg completely and place it
in the most forward position (green LED indicator).
7. Press the test button to check a proper installation of
the product. When one of the LED indicators is red,
repeat the installation steps until all LED indicators are
green.
8. Make sure all luggage and other objects are secured.
2wayFix maintenance instructions
1. Keep the 2wayFix clean. Do not use any lubricants or
aggressive cleaning agents on this product.
2. Press the test button to make sure that the batteries
have enough voltage (green LED indicator).
3. If the electronic component contains the right battery
type but is no longer functioning properly, contact your
retailer. The indicators only show whether the product
has been installed correctly. If the battery circuit is
interrupted after correct installation, the product is still
safe.
4. Replace old batteries with new, high-quality ones. Pay
attention to the plus and minus poles when installing
the batteries.
EN
Batteries
- Keep all batteries out of reach of children.
- Only use the recommended type AA / LR6
(1.5 volt) batteries. Do not use rechargeable batteries.
- Never expose this product or the batteries to fire.
- Do not use old batteries or batteries that show signs of
leakage or cracks.
- Use only high-quality new batteries.
Environment
Keep all plastic packaging materials out of reach of your
child to reduce the risk of suffocation.
If you are no longer using this product, we ask that, for the
sake of the environment, you dispose of the 2wayFix in
accordance with local waste disposal regulations.
17