Hettich AvanFit 400 Instructions De Service Et De Montage page 9

3. Safety
Removing or modifying safety guards present a risk of injury!
1. Switch off the main switch before removing, opening safety
guards or before carrying out maintenance and cleaning
work on them.
2. Prevent main switch from switching back on again.
3. Check to make sure that the machine is idle.
Immediately rectify malfunctions impairing work safety.
Warning
There is a risk of injury if the machine starts up
automatically!
1. Dissipate residual energy before commenci-
ng work on the machine.
2. Prevent machine from switching back on
again.
Caution
Hot surfaces / objects present a risk of injury!
The surface of electric motors, for example, can
reach a temperature of over 60 °C.
Wear hand protection when working on hot
components.
Do not touch any hot surfaces to prevent burns.
Do not attach any temperature sensitive parts to
the surface or place any temperature sensitive
parts on the surface.
Caution
Pressure escaping from the compressed air sys-
tem presents a risk of injury!
The components of the compressed air system
are under high pressure.
Regularly check all compressed air lines, hoses
and screw connections for leaks and externally
visible damage.
Immediately rectify any damage that is detected.
Warning
Keep the work areas free from soiling, residues of
operating consumables and auxiliary materials as
well as any objects that may be left lying around.
Keep the workplace, in particular all handles,
steps, railings, platforms, staging and ladders,
free of soiling.
Carefully store away all replacement parts and
tools.
Dispose of residual operating consumables and
auxiliary materials in the proper manner.
en
9