Software; Simatic Mobile Operator Panel; Simatic Operator Panel; Interface Basics - Hettich AvanFit 400 Instructions De Service Et De Montage

5. Software

5.1 SIMATIC Mobile Panel
The machine is operated and its current status displayed by me-
ans of SIEMENS SIMATIC Mobile KTP400.
The operating structure as well as individual controls are descri-
bed on the following pages.
A detailed description of the SIMATIC Mobile Panel can be found
in the facility's manual.
en
Fig. 10: "Start screen" on the operating panel
18

5.2 SIMATIC operator panel

5.2.1 Interface basics

The general machine controls as well as user interface navigation
are provided in all screens and can be operated from all screens
as soon as they are enabled. The energy status and operating
mode bars are shown depending on the screen that is being
displayed.
Button operability can be seen from the colour system explained
below.
Fig. 11: Main menu with general controls and displays
(1) Machine controls
This line shows the machine's basic controls. These include:
End position button
Function Control colours Explanation
Pressing the end
position button and
setting "Energy ON"
energy status moves
the station that is not
in end position to the
end position.
(2) Energy status
(1) Machine
controls
(4) User interface
navigation
End position is
given for all the
machine's stations
No end position gi-
ven for at least one
of the machine'
stations