10. Troubleshooting
10.4 Malfunction message
If a malfunction message appears on the operator panel while the
machine is operating, perform the following steps:
1.
Carry out visual machine inspection.
2.
Select "home position" on the operator panel.
Malfunctions can be caused by:
1.
faulty end position sensors
2.
maladjusted end position sensors
3.
faults valves
4.
faulty cylinders
Once the malfunction message on the operator panel is closed,
you can start assembling drawers. If it does not, please contact
Hettich Customer Service (see page 2).
en
37