Further Controls; Labelling On The Machine; Workplace Description - Hettich AvanFit 400 Instructions De Service Et De Montage

4. Description of the machine

4.3.2 Further controls

Fig. 8: Operator panel on the machine
en
Description of controls
No. Function
Mushroom push/pull "emergency stop" button
When operated, the EMERGENCY STOP button(s)
1 switch off the supply voltage and air pressure supply to
electrical and pneumatic actuators in a safety-related
manner.
Illuminated pushbutton – Control ON
Pressing the illuminated pushbutton activates the
control system. After switching on the machine at the
2
main switch, the indicator light comes on after approx.
45 seconds. Only then can the control system be swit-
ched on.
Pushbutton – Control OFF
3 Pressing the illuminated pushbutton deactivates the
control system.
Key operated set up switch
Actuating the key operated switch makes it possible to
4
set the servo width adjustment facility from the display
without involving any two hand operation.
Touch user interface
All settings required for operating the machine can be
5 made via the touch user interface. Detailed information
can be found in the further course of the operating
instructions.
16

4.4 Labelling on the machine

You will find the following labels on the machine:
Area: Electrotechnical equipment
Warning of hazards from electrical current
Area: Infeed (insertion zone)
Warning - crushing of hands
Area: Entire machine
Reference to a single workstation

4.5 Workplace description

Work which may be done by the operating personnel includes
• switching ON and OFF,
• inserting components,
• starting the assembly process and
• removing assembled drawers.
The following activities are intended for specialised personnel:
• Rectifying malfunctions,
• repairing, servicing the machine.