Hettich AvanFit 400 Instructions De Service Et De Montage page 2

Translation of the original German language operating
instructions for the AvanFit YOU 400 drawer assembly jig
Manufacturer: Hettich Maschinentechnik GmbH & Co. KG
Vahrenkampstr. 12-16
32278 Kirchlengern
Effective: 2020-08-20 / 00
en
2
Foreword
Warning
Read these operating instructions carefully in
order to obtain a thorough understanding of the
machine and how to install and maintain it.
Operate the machine in the proper manner as
described in these instructions so as to avoid
injury and damage to the machine.
Keep these operating instructions to hand and
consult them if you are in any doubt as to
carrying out any particular procedure.
The operating instructions are a separate part of
the overall documentation, in the same way as
the replacement parts lists and documentations
from sub-suppliers. The overall documentation
must be made available to operating, cleaning
and servicing personnel.
Customer Service
Paul Hettich GmbH & Co. KG
Vahrenkampstr. 12-16
D-32278 Kirchlengern
Phone: +49 5223 77 1765
Email: HPH-service@de.hettich.com
OPERATING INSTRUCTIONS:
Hettich Maschinentechnik GmbH & Co. KG
©
2020 von Hettich Maschinentechnik GmbH & Co. KG
Copyright to the operating instructions
The copyright to these operating instructions remains with
Hettich Maschinentechnik GmbH & Co. KG.
These operating instructions are intended for the operating
personnel. They contain regulations and drawings of a technical
nature that must not be duplicated either in whole or in part,
distributed, used without permission for advertising purposes or
communicated to others.