Intended Use; Safety Information - Scheppach CSE2600 Traduction Des Instructions D'origine

4. Intended use

The machine meets the currently valid EU machine
directive.
Before starting any work, all protective and safety
devices must be in place.
• The machine has been designed to be operated by
one person.
• The operator is responsible for third parties in the
area of operations.
• All safety and hazard notices on the machine must
be observed.
• All safety and hazard notices on the machine must
be kept in a completely legible condition.
• Use the machine in a technically flawless condition
only, as well as for its intended purpose, in a safe
manner and being aware of dangers, in compliance
with the operating instructions!
• Disruptions which can affect safety in particular
must be eliminated straight away!
• The manufacturer's safety,
maintenance instructions as well as the technical
data given in the calibrations and dimensions must
be adhered to.
• Relevant accident prevention regulations and other
generally recognized safety and technical rules
must also be adhered to.
• The machine may only be used, maintained or
repaired by trained persons who are familiar
with the machine and have been informed about
the dangers. Unauthorized modifications of the
machine exclude a liability of the manufacturer for
damages resulting from the modifications.
• The machine is intended for use only with original
spare parts and original tools from the producer.
• Any other use is considered to be not intended. The
manufacturer excludes any liability for resulting
damages, the risk is exclusively borne by the user.
• The device must not be used for commercial,
technical or industrial applications.
• If you are not sure whether working conditions are
safe or unsafe, do not work with the machine.
• The chainsaw has been designed to cut wood and
smaller trees with a diameter not bigger than the
chain bar length.
Warning!
For your own safety, please thoroughly read this
manual and the general safety instructions before
turning the device on. If you give the device to third
parties, always include these instructions.
28 | GB
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
operation and

5. Safety information

Please read all instructions before working with
this tool.
When using electric tools basic safety precautions
should always be followed to reduce the risk of fire,
electric shock and personal injury.
Please read all instructions and warnings carefully.
Non-compliance with instructions and warnings can
lead to electric shock, fire and/or serious injuries.
Please store instructions and warnings safely. The
term "device" refers to electrically operated devices,
either powered by mains operation (with mains cable)
or battery powered (without mains cable).
General notes on safety
• Before you do any work with the electric chainsaw,
make yourself familiar with all operating parts.
• Practise using the saw (sawing logs on a sawhorse)
and get an experienced user or a specialist to
explain to you the function of the saw, the way of
working, the techniques of sawing and the personal
protection equipment.
• Observe the noise protection and local regulations
for woodcuts.
• Local regulations may
examination. Contact the forest administration.
General safety instructions for power tools
1. Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable Iiquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
require a qualifying