Installing The Standard Driver And The Status Monitor - Oki OKIPAGE 10e Mode D'emploi

Windows 3.x
Installing the Standard Driver and the
Status Monitor
1 Insert the disc into your CD-ROM drive.
2 Close all open applications.
3 Click File→ → → → → Run.
|
E-18 OKIPAGE 10e
4 Enter d:\install (assuming "d" is the location of your CD
ROM drive). Click OK.
The OKI Menu Installer Setup window appears.
Click Printer Software to continue the installation.
5 Welcome window appears. Click Next.
6 License Agreement appears. Click Yes.
7 Destination window appears. Click Next.
8 Select Program Folder window appears. Click Next.
9 Port Selection Folder window appears. Select printer port
and click Next. Installation begins. Follow the
instructions on the screen.
10 When prompted, click Finish to complete the installation.