Windows 95, Windows 98, And Windows Nt 4.0; Installing The Driver And Status Monitor - Oki OKIPAGE 10e Mode D'emploi

Windows 95, Windows 98, and
Windows NT 4.0

Installing the Driver and Status Monitor

To install the printer driver and on-screen status monitor:
1 Close all open applications.
2 Insert the OKIPAGE 10e CD into your CD-ROM drive.
3 Click the Start button on the Windows taskbar, then click
Run.
4 Enter d:\install (assuming "d" is the location of your CD
ROM drive). Click OK.
The OKI Menu Installer Setup window appears.
Click Printer Software to continue the installation.
5 Welcome window appears. Click Next.
6 License Agreement appears. Click Yes.
7 Destination window appears. Click Next.
8 Select Program Folder window appears. Click Next.
9 Port Selection Folder window appears. Select printer port
and click Next. Installation begins. Follow the
instructions on the screen.
10 When prompted, click Finish to complete the installation.
11 Restart Windows.
12 Click the Start button on the Windows taskbar, then
choose Programs→ → → → → OKIPAGE 10e. From the submenu,
click Electronic Registration, Windows Status Monitor,
or Readme.txt to see any of these programs.
!
To register your printer online, visit the OKIDATA Web
Site at http://www.okidata.com.
|
Quick Start Guide E-17