Choosing Paper - Oki OKIPAGE 10e Mode D'emploi

Masquer les pouces Voir aussi pour OKIPAGE 10e:
Table des Matières

Publicité

To return to the top exit, close the rear support bar and push
the rear exit extender firmly back in place, paper will then exit
into the top bin.
!
See Operating Your Printer in the User's Guide for
information on using special print media.

Choosing Paper

• For best results, use paper that is smooth and of high
quality.
• Store paper in its ream wrapper until you are ready to use
it, and keep it away from moisture or other conditions
that can cause it to wrinkle or curl.
• Avoid printing on both sides of the paper for more than a
few pages, or preprinted documents that have been in a
photocopier.
• Try paper before you buy it in quantity.
!
See Operating Your Printer in the User's Guide for
information on using recycled print media.
When purchasing paper, use the following specifications for
best results:
Basic Weight
Paper cassette: 16 to 28 lb (60 to 105 g/m
Manual feed: 16 to 32 lb (60 to 120.5 g/m
Composition
100% chemical wood pulp and/or cotton fiber
Fusing Compatibility
Must not scorch, melt, offset, or release hazardous emissions
when heated to 392°F. (200°C)
2
2
)
|
Quick Start Guide
E-13

Publicité

Table des Matières
loading

Table des Matières