Table des Matières
Publicité
Turning on the Printer
1 Make sure the printer is off.
2 Plug the cord into the printer first, then into a grounded
outlet.
3 Turn the printer on. It takes about 10 seconds for the
printer to initialize and warm up, and for the Ready light
on the operator panel to turn on, indicating the printer is
ready to receive data.
Printer Software
The CD-ROM provided with your printer includes printer
drivers and the on-screen printer status monitor and operator
panel required to use all the OKIPAGE 10e features. Follow
the steps in this guide to install the appropriate driver on your
computer system.
Printer Drivers
Printer drivers must be installed so your software application
can communicate with your printer and support all of its
features.
The OKIPAGE 10e CD-ROM includes printer drivers for
printing in the following Windows environments:
• Windows 95
• Windows 98
• Windows 3.x
• Windows NT 4.0
!
If you are using DOS or another non-windows operating
system, select a PCL-compatible driver.
|
Quick Start Guide
E-15
Publicité
Table des Matières
