The Parts - Waring Commercial WFP16SCD Mode D'emploi

THE PARTS

The Waring
®
following standard parts and accessories:
1. Base – Heavy-duty die-cast base
a. Motor shaft
2. Controls – Large, easy-to-read control buttons
a. OFF
b. ON
c. PULSE
3. Safety interlock (not shown). Prevents machine from
operating until cover is in place
4. Batch Bowl – Sealed clear 4-quart (16 cups/3.75L)
batch bowl
5. Cover – Snap-lock cover with removable gasket for
easy cleaning
a. Cover gasket
b. Large feed chute – for feeding larger foods
c. Large pusher – for use with the large feed chute
d. Small Pusher – place inside of the large pusher for use
with smaller foods
Note: Interlocking pushers allow use of the entire feed tube
for large foods and provide controlled processing for small-
diameter foods such as carrots, celery and pepperoni.
6. S-blade – To chop, grind, purée and mix: Sealed and locked
in place for liquid processing and easy pouring
7. Slicing disc – Adjustable up to 16 thicknesses
8. Shredding disc – Reversible for fine or coarse shred
9. Sealed whipping disc
10. Disc Stem – Detachable disc stem for use with adjustable
slicing disc and reversible shredding disc
11. Dicing assembly
a. 3⁄8" slicing blade
b. 3⁄8" dicing grid
c. Dicing grid punch tool (for cleaning)
12. Cleaning brush (not shown)
13. Continuous feed chute
14. Continuous feed chute cover
15. Slinger
Commercial WFP16SCD consists of the
6