Resetting Thermal Protection - Waring Commercial WFP16SCD Mode D'emploi

Large pusher
This pusher is typically used when inserting vegetables
horizontally for longer cuts.

RESETTING THERMAL PROTECTION

The WFP16SCD food processor is equipped with an automatic
reset switch to protect the motor from overheating.
If your food processor stops running under heavy use, press the
OFF button and unplug the power cord. Empty the batch bowl of
all its contents and set aside. Allow approximately 30 minutes for
the motor to cool down.
Reassemble unit, plug the power cord back into the outlet and
run first with the bowl empty. Put food into the bowl and continue
processing.
If your food processor does not function properly following
this procedure, discontinue use and contact a Certified Waring
Customer Service Center.
15